Otterbox 1900 PDA Case

OtterBox 1900 features a water-proof, crush-proof, drop-proof design that economically ruggedizes your PDA and protects your valuable data.

• Easier to access the iPAQ.
• Cuts down on vibrations.
• Easier to take the Otterbox in and out of the cab.
• Easier to hold in one hand when scouting.
• It has a "Large CF Pod" available that works with a CF GPS receiver so your Compact Flash GPS can be protected.
• Universal fit to most popular PDA's.
• Waterproof and dustproof while in use.
• Many accessories available to allow use of GPS, barcode readers, RFID readers, etc.
• Replaceable screen membrane protects the PDA touch screen from scratches while providing easy access to front panel buttons.
• Impact resistant, flip-up screen cover.
• Adjustable neoprene hand strap.
• Clear top pod for IR usability.
• Easy open Pod system for access to CF and SD slots.
• Removable plug for headphone/headset access.
• Sealed bottom hatch provides access to PDA's sync and charge connectors.
• Gore membrane vent for heat and pressure dissipation.
• External stylus holder.
• Compound latches for easy opening and secure closing of the case.
• Glass reinforced Polycarbonate shell for maximum strength and durability.
• Thermoplastic rubber over molding for high grip and impact absorption.
• Drop and Shock :Four foot drop to concrete, all surfaces, edges and corners - Passed.
• Water Protection : Procedure 1, Immersion - Passed.
• Water testing Temporary Immersion (30 minute immersion at 1 meter depth) - Passed.
• Dust Intrusion : Procedure 1 (Blowing Dust) - Passed.
• Dimensions (Case only) : 6.5" L x 4.5" W in x 2.2" D (165 mm x 114 mm x 56 mm).
• Weight (Case only) : 0.7 lb (0.32 kg).
   
• Includes Rail Mount Kit

The rail mounting kit allows you to mount your 1900 PDA case onto anything that is 1.25"(32mm) in diameter. The kit includes a heavy duty, shock-absorbing, adjustable mount which allows you to position your PDA in the best location and protect it from vibration. The PDA case is held securely while being easily and completely removable from the mount. Includes mount and all necessary hardware.

There are 2 options when buying the Otterbox Mount

• 9 Pin Serial POD - Offers a 9 Pin Serial Connection for external GPS and other Serial Devices
• Through the Box POD - Replicates the connection on the bottom of the iPaq for external connections

Autocharger Adapter

Used to connect your Otterbox 1900 or Powered RAM Mount to a Cigarette Lighter for charging

Woods Power-Grip Vacuum Cup Mount:

The Woods Power-Grip has a 4 1/2" vacuum pump suction cup with a 40 lb weight capacity.

The Suction Mount can attach to any glass surface and can be freely adjusted for viewing from any angle. The Navman GPS receiver attaches directly to this mount.

Otterbox CF Pod

The Large POD allows for the use of larger GPS devices and other sizable CF and SD accessories while providing full environmental and impact protection.

9 Pin Serial Connection for PDA's

This pod provides a standard 9 pin serial port that works with most GPS receivers with a serial cable. Also includes a power input port that works with most iPAQ Auto Adapters. he Serial 9 Pin Power Pod works with IPAQ Models 38xx, 39xx, 54xx, 55xx, 22xx, 21xx, 24xx, and 27xx.

Otterbox Through the Box Pod

This pod holds up to 6 wires such as GPS & Power Cables and provides a secure connection that holds up to bouncing in the field. This kit is for the IPAQ models 36xx, 37xx, and the Dell Axim.

iPAQ to GPS Cable

The iPAQ GPS cable has a connector on one end that plugs into the bottom of iPAQ (21xx, 22xx, 38xx, 39xx, 41xx, 43xx, 54xx, and 55xx series). The plug includes a cigarette adapter. The other end of the cable is a male, serial port. This is designed to plug into a GPS "PC Cable" that has a female serial plug that is available with virtually all GPS receivers.

Powered iPAQ 22xx Series RAM-Mount

The Powered iPAQ RAM-Mount includes:

Powered iPAQ Universal RAM-Mount

Requirements:

• iPAQ model 21xx, 22xx, 24xx, 27xx, 63xx and 65xx.  (Note that this mount will not work with the 36xx, 37xx, 38xx, 39xx, 54xx or 55xx series iPAQ.)

Rechargeable Battery Pack:

The Rechargeable Battery Pack will extend the use of your IPAQ battery allowing for continuous use all day and will last longer per charge than standard IPAQ batteries. It features a compact design, and will add approximately 9 hours of life to you IPAQ. No special charging is required . Re-charge and top-off the charge at any time. Built in over-charge protection prevents over-charging. Included with the battery pack is a battery pack holster, IPAQ adapter cable, and wall charger.

Belt Clip:

Another accessory that now offered is a rigid Belt Clip. The belt Holster fits any IPAQ expansion pack and Navman GPS receiver and can be worn on your belt while working. The IPAQ slides into the holster with the screen-side facing inward to protect the screen, and latches into place.

Mounting Bracket:

The Mounting Bracket is a strong and durable alternative to mount your IPAQ and Navman sleeve. It is adjustable for any viewing angle, with easy dismount/remount of the GPS receiver and a vibration free design. Conveniently clamps to 3/4" or 1" round, or square post.

Dell Axim to GPS Serial Cable:

This cable will connect the bottom port of the Dell Axim to the female DB9 RS232 serial connection from the GPS receiver.

JD Starfire Serial Cable:

The Starfire Serial cable goes from the bottom of the Starfire GPS antenna, and comes out with a serial plug. The serial end can be plugged into the serial port of a laptop or dektop computer so it can communicate with the Starfire GPS receiver. To use the Starfire with a Dell Axim or IPAQ Pocket PC, you will need the Starfire Serial Cable along with the appropriate Pocket PC Cable (such as the Axim and IPAQ cables listed above).

IFB2 Box:

The IFB2 box allows users to connect to boom sense lines so Site Mate will only log data when the booms are turned on. The IFB2 box can work with any GPS receiver that has a serial port output cable and outputs NMEA0183 data. When used with a Raven GPS receiver or the power adapter connector, the IFB2 box will reduce a 12 volt input to a 5 volt trickle charge to the IPAQ. This helps the IPAQ to "maintain" power during its use. It is still recommended that users completely charge the IPAQ's battery every 3 days or so. The IFB2 box also allows Guide Mate to communicate to an external Raven light bar through the IFB2 box.

*May not be available

IFB2 Box Power Cable:

The IFB2 Box Power Cable is intended to supply power to the IFB2 Box when a Non Raven GPS receiver is being used.

*May not be available