Ag-Leader GPS Receivers

AgLeader 5100 GPS System

Includes Magnetic Mounts and Cigarette Lighter Power Data Cable (hooks to EZ-Guide Plus w/o GPS)

The new GPS 5100 gives you superior accuracy to match your operational needs. The GPS 5100 receiver was built specifically for agricultural operations that require high-accuracy repeatability in row-on-row field operations.

• Easy installation. The GPS 5100 is easy to install in a variety of agricultural field equipment and can be easily moved from one piece of equipment to another.

• Correction accuracy to match your needs. The system is compatible with a wide range of correction services, including WAAS/EGNOS, OmniSTAR VBS, OmniSTAR® XP/HP and RTK.
• Ideal for auto-steer systems. The system's ability to provide highly accurate repeatability makes it the ideal companion for auto-steer.

A standard GPS 5100 receiver provides the following features:

• 12 GPS (C/A-code) tracking channels, code carrier channels
• Horizontal RTK positioning accuracy 2.5 cm (0.98 in) + 2 ppm, 2 sigma; vertical RTK positioning accuracy 3.7 cm (1.46 in) + 2 ppm, 2 sigma
• Submeter differential accuracy (RMS), assuming at least five satellites and a PDOP of less than four
• Combined GPS/DGPS receiver and antenna
• System level cable
• AgRemote utility with four-button keypad to configure and view system properties (download from the Ag Leader website at www.agleader.com)
• LED status indicator
• The receiver outputs a 1 PPS (pulse per second) strobe signal on both ports. This signal enables an external instrument to synchronize its internal time with a time derived from the very accurate GPS system time.
• WAAS differential correction compatibility
• Field computer compatibility
• EVEREST™ multipath rejection technology
• OmniSTAR VBS and HP positioning compatibility
• Two ports that support both CAN 2.0B and RS-232:
  • CAN
    • J1939 and NMEA 2000 messages
      Note – The GPS 5100 receiver is ISO 11783 compliant. It supports some ISO 11783 messages.
  • RS-232
    • NMEA-0183 output: GGA, GLL, GRS, GST, GSA, GSV, MSS, RMC, VTG, ZDA, XTE (the default NMEA messages are GGA, GSA, VTG, and RMC)
      Note – PTNLDG, PTNLEV, PTNLGGK, PTNLID, and PTNLSM are Trimble proprietary NMEA output messages.
    • RTCM SC-104 output
    • Trimble Standard Interface Protocol (TSIP) input and output

GPS 1500:

The GPS 1500 is an all-in-one antenna/receiver system. The compact, low-profile unit features fixed or magnetic mounting options. It is an affordable solution for sub-meter accuracy with fast startup and reacquisition times. Differential options include WAAS and EGNOS.

Key features:

• Outputs simulated radar speed signal.
• 10 Hz output.
• Output of NMEA position data to other equipment.
• Ideal for AutoSwath in SeedCommand and DirectCommand applications.