Demo and Used Equipment:

GPS Receivers:

AgLeader GPS 5100 (Demo Unit):

Includes Magnetic Mounts and Cigarette Lighter Power Data Cable (hooks to EZ-Guide Plus w/o GPS)

The new GPS 5100 gives you superior accuracy to match your operational needs. The GPS 5100 receiver was built specifically for agricultural operations that require high-accuracy repeatability in row-on-row field operations.

• Easy installation. The GPS 5100 is easy to install in a variety of agricultural field equipment and can be easily moved from one piece of equipment to another.

• Correction accuracy to match your needs. The system is compatible with a wide range of correction services, including WAAS/EGNOS, OmniSTAR VBS, OmniSTAR® XP/HP and RTK.
• Ideal for auto-steer systems. The system's ability to provide highly accurate repeatability makes it the ideal companion for auto-steer.

A standard GPS 5100 receiver provides the following features:

• 12 GPS (C/A-code) tracking channels, code carrier channels
• Horizontal RTK positioning accuracy 2.5 cm (0.98 in) + 2 ppm, 2 sigma; vertical RTK positioning accuracy 3.7 cm (1.46 in) + 2 ppm, 2 sigma
• Submeter differential accuracy (RMS), assuming at least five satellites and a PDOP of less than four
• Combined GPS/DGPS receiver and antenna
• System level cable
• AgRemote utility with four-button keypad to configure and view system properties (download from the Ag Leader website at www.agleader.com)
• LED status indicator
• The receiver outputs a 1 PPS (pulse per second) strobe signal on both ports. This signal enables an external instrument to synchronize its internal time with a time derived from the very accurate GPS system time.
• WAAS differential correction compatibility
• Field computer compatibility
• EVEREST™ multipath rejection technology
• OmniSTAR VBS and HP positioning compatibility
• Two ports that support both CAN 2.0B and RS-232:
  • CAN
    • J1939 and NMEA 2000 messages
      Note – The GPS 5100 receiver is ISO 11783 compliant. It supports some ISO 11783 messages.
  • RS-232
    • NMEA-0183 output: GGA, GLL, GRS, GST, GSA, GSV, MSS, RMC, VTG, ZDA, XTE (the default NMEA messages are GGA, GSA, VTG, and RMC)
      Note – PTNLDG, PTNLEV, PTNLGGK, PTNLID, and PTNLSM are Trimble proprietary NMEA output messages.
    • RTCM SC-104 output
    • Trimble Standard Interface Protocol (TSIP) input and output

Trakker T100:

Two Available
One left!
New Price was: $2400.00
Special Price now: $1000.00

The GBX-12 uses an Rockwell Jupiter Twelve channel receiver and is a fully integrated DGPS sensor, possessing both GPS and beacon differential receiver technologies. The GPS engine is a leading L1 OEM product employing proven hardware and software feature for real-time positioning and navigation applications.

The beacon engine is based upon advanced, fully automatic, dual channel technology. This integrated DGPS product is designed to function in a wide array of applications and environments. Compact, lightweight, yet rugged.

5 Portable Wheel Load Intercomp Scales

Up to 20,000 lbs each, comes with all linking and charging cables.

Intercomp PT 300 Wheel Weigh Scales are self-contained, high-capacity digital wheel load scale designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment. 12" wide platform accomodates single tire (outside tire in dual wheel configuration). The PT300 scale is designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment.

Weighing a mere 37 lb, this sturdy, all aluminum, fully electronic, self-contained wheel load scale is capable of weighing loads up to 20,000 lb and more, with an accuracy of +/- 1%.

The scale is fully battery operated and only requires infrequent recharging, which can be accomplished by any 12, 110 or 220 volt power source. A charger adaptor is provided.

The display area can be lighted for night use by merely touching the "LAMP" switch. It is possible to sequentially couple 2, 4, or 6 PT300 scales in series, for the purpose of obtaining the total weight of all the preceding scales will be displayed. The scales are linked at the I/O terminal jack with an optional cable(s). (Includes the optional cables).

Factory inspected, Fall 2004

Yield Monitors:

GRAIN

• AgLeader Insight Display
• Moisture Sensor
• Grain Monitor Sensor
• Raven Invicta 210 Reciever
• All cables and hardware needed for installation on 2005 John Deere 9760 STS Combine

System was working when removed, grower swapped to Greenstar for main purpose of autosteer on tractor and combine.

Purchase from Grower, call AIM for details

COTTON

Zycom (AgriPlan): Model 700

Special Price: $750.00

Field Computers and other equipment:

TDS Ranger (On the shelf too long - Need to Sell!):

Smart, tough and loaded with features

The Ranger's carbon-fiber construction makes it lightweight yet rugged. And its soft polyurethane exterior provides great grip in any weather. Separate navigation, alpha and numeric keypads are widely spaced to make it easy to operate even when you're wearing gloves.

• Full-color screen
  Every Ranger comes with a full-color screen. The reflective LCD touch screen keeps the display crisp and bright even in direct sunlight, and the powerful front light illuminates the screen in low-light conditions.
  
• Built for extreme temperatures
  The Ranger performs even in extreme conditions. It works in temperatures as high as 140 °F (60 C) or as low as -13 °F (-25 C). The Ranger also meets military (MIL-STD-810E) and IP67 standards for drops, vibration, dust, corrosion and water immersion.
  
• Useful programs
  The Ranger comes with many programs you'll find useful in the field. These programs include a calculator for quick field calculations, a keypad wedge for working with bar-code laser scanners, and Wave Recorder software that lets you record and play back audio.
  

Was $2,499.00